OBO Bettermann Junction Box Systems

Product Details:

The junction boxes consist of thermoplastic material. The bottom parts are made from impact-resistant polypropylene, the box cover is made from extremely hard-wearing, impact-resistant polycarbonate. The high IK 10 impact resistance at -5°C shows this also. Thanks to the elevated cover, OBO creates significantly more wiring space, therefore offering the facility to install and protect pushbuttons and series terminals, as well as the option to accommodate control sensors, switches and electronic equipment from the housing and installation technology area. Together with the fastening plate, it is an ideal partner in visible installations.

Features:

• With plug-in seal
• Transparent elevated cover
• T Series

Product Details:

We are offering OBO Bettermann Junction Box A11 to our client.

Features:

• 1 cut-out tool for every 10 boxes
• Clamshell

Product Details:

The junction boxes are made of a thermoplastic polypropylene polymer with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable. This allows installation of cables either directly through the seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. In addition, cable glands can be inserted through the openings instead of the seals and locked with a locknut from inside. The cable junction boxes can be screwed onto an M6 thread or mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5.

Features:

Cover with labelling panel.

Plug-in seal.

Product Details:

We are offering OBO Bettermann Junction Box A- series to our client.

+ Halogen-free thermoplastic+ Sturdy external fastenings+ Quick mounting with snug-fitting clamshell+ Suitable for wet rooms, IP54

Product Details:

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable. This allows installation of cables through the seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut. The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5.

Features:

• Cover with labelling panel and lead-sealed.
• Plug-in seal